If you depress the brake pedal, the engine may automatically restart. Auto Idle Stop does not activate when: • The Auto Idle Stop OFF button is pressed. • The driver’s seat belt is not fastened. • The engine is not adequately warmed up or coolant temperature is high. • The transmission fluid temperature is low or high. To be sure, check the idle speed, and verify that the compressor is engaged at idle. It could be low on freon, but that would also cause the compressor to short-cycle at high rpms, and it would definitely indicate a leak. Good luck. HEMI-Now. '04 RAM 1500 QC HEMI on stock 20s. Additionally, ensure that the switch is not stuck in the wrong position. If you notice any issues, clean the switch thoroughly or consider replacing it with a new one. 2. Check and Clean the Air Filter: Locate the air filter, usually found on the side or top of the generator’s engine. Due to the cold weather – stop-start won’t intervene when the engine is too cold, this is due to the car’s computer being sufficiently savvy knowing that an engine is most efficient when it’s fully warm! Due to this, the computer will keep the engine running so that it will then be an optimal temperature. noshortcuts. 288 posts · Joined 2021. #2 · Jun 2, 2022. When the button is pressed after starting the car, the button lights up and ISG is off. If the button is not pressed and you come to a stop, the engine either shuts off with a green light on the dash or keeps running with a amber (or maybe it's red) light on the dash. FWOMn.

idling stop not working